Bookler® Ratchet Bar Attachment With Hex Fitting

Model No. 69708. Bookler® Ratchet Bar Attachment with Hex Fitting. Allows any Mediflex Surgical Holder and Positioner with a Quick Disconnect Fitting to hold any Bookler or Bookwalter branded blade. ...
Detail
1238

Bookler® StrongArm™ Holder And Positioner Set, 12″ (30cm) Post

Bookler StrongArm Holder and Positioner set, 12″ (30cm) Post. Model No. 72190-SA. Complete Bookler® StrongArm™ Table Mounted System. The system includes the Bookler StrongArm with a 12″ (30cm) Field Post. Single tensioning knob that unlocks/locks all three joints simultaneously Height Adjustable Quick Disconnect feature allows for a variety of distal working tips to be used on the same arm
Model Description Size Quantity
72011 Bookler Field Post  12″ 1
72013 Bookler Post Coupler 1
73002-SA Bookler StrongArm with Quick Disconnect Tip 1
...
Detail
1209

Bookler® StrongArm™ Holder And Positioner Set, 18″ (45cm) Post

Bookler StrongArm Holder and Positioner set, 18″ (45cm) Post. Model No. 72191-SA. Complete Bookler® StrongArm™ Table Mounted System. The system includes the Bookler StrongArm with a 12″ (30cm) Field Post.
Model Description Size Quantity
72009 Bookler Field Post  18″ 1
72013 Bookler Post Coupler 1
73002-SA Bookler StrongArm with Quick Disconnect Tip 1
...
Detail
1179

Bookler®StrongArm™ Horizontal Bar With Quick Disconnect

Bookler StrongArm Horizontal Bar w/ Quick Disconnect Hex Fitting for use w/ interchangeable tips and hooks. Model No. 73002-SA. The Bookler® StrongArm™ Holder and Positioner combines a Bookwalter-styled field post with a Mediflex StrongArm device. The world-wide acceptance of the Bookler FlexArm Surgical Holder and Positioner has led to the introduction of the Bookler StrongArm Device. This version features a StrongArm Holder and Positioner with a 1″ diameter horizontal bar which fits Bookler and Bookwalter-style 1″ x 1″ post couplers. This allows the arm to be attached to any 1″ Diameter Field Post. Mediflex offers a variety of Post Heights. This allows use of the system, even in Bariatric Laparoscopic Procedures. Dimensions: Overall Length: 25.5″ (64.8cm) Horizontal Bar: 6″ (15.2cm) Mid Segment: 10.5″ (26.6cm) End Segment: 8″ (20.3cm) Note: Tips can add about 3″ (7.6cm) to the end segment length   ...
Detail
1193

Delrin Instrument Clamp Attachment With Hex Fitting

Model No. 69707. Delrin Tip with Hex Fitting. The Delrin tip will fit into any Mediflex® Holder and Positioner equipped with a Quick Disconnect Fitting. It is designed to hold rigid laparoscopes that have diameters ranging from 1.5mm to 12.5mm. It can also be used for instruments with plastic or shrink wrapped shafts.   Tips hold virtually any instrument, retractor or endoscope Even when tightened, some manipulation possible making the tips ideal for scopes and seldom moved instruments such as Fundus Graspers in Lap Chole ...
Detail
1224

Heavy Duty O.R Rail Clamp

Model No. 69099. Heavy Duty O.R Rail Clamp. The Mediflex® Heavy Duty O.R. Rail Clamp has been designed to be easy to position on any standard OR Table. It can be applied over 1 or 2 layers of drapes and can be used sterile or non-sterile. While designed specially for Mediflex Table Mounted Products (Long Reach Universal Flex Arm™ Holder and Positioners, all StrongArm Holders and Positioners and The Mediflex Draughn Lap-Rack Instrument Holder), it will accommodate most round bar posts ranging from 1/2″ (1.27cm) to 5/8″ (1.59cm) in diameter. ...
Detail
1358

Mini-Bookler® Ratchet Bar Attachment With Hex Fitting

Model No. 69708-MB. Mini-Bookler Ratchet Bar Attachment. This device allows any Mini-Bookler Retractor Blade to be attached to any Mediflex manufactured Surgical Holder and Positioner equipped with a Quick Disconnect Distal Tip. ...
Detail
1261

Quick Grip Scope Holding Attachment, Hex Fitting, 10mm

Model No. 72162. 10mm Quick Grip Scope Holder. The 10mm Quick Grip Scope Holder will fit into any Mediflex® Holder and Positioner equipped with a Quick Disconnect Fitting. It is designed to hold rigid laparoscopes that have diameters 10mm. It can also be used for instruments whose shafts are 10mm.   Automatic Holding Atraumatic grip, can prevent scope damage Tips hold virtually any instrument, retractor or endoscope ...
Detail
1210

Quick Grip Scope Holding Attachment, Hex Fitting, 5mm

Model No. 72163. 5mm Quick Grip Scope Holder. The 5mm Quick Grip Scope Holder will fit into any Mediflex® Holder and Positioner equipped with a Quick Disconnect Fitting. It is designed to hold rigid laparoscopes that have diameters 5mm. It can also be used for instruments whose shafts are 5mm. ...
Detail
1271

Rail Clamp Converter For Over-Sized Table Rails

Model No. 72225. Rail Clamp Converter for Over-sized Table Rails. While the Standard Rail Clamps of Mediflex® Devices will fit the vast majority of OR Tables, some carbon fiber tables have over-sized rails. This adapter fits the oversized rails and will then hold any Mediflex rail mounted product. ...
Detail
1177

Rail Clamp Extender

Model No. 72224. Rail Clamp Extender. This device fits onto standard OR Table rails in order to extend the rail a few inches outward. Any Mediflex® Rail Clamp will then fit onto the extender. It extends the clamping position for Mediflex Rail Clamps about 2″ (5.1cm) further from the patient. This is particularly useful in Bariatrics to prevent the table posts from touching the patient. ...
Detail
1134

Stainless Steel Clamp Attachment With Hex Fitting

Model No. 69706. Stainless Steel Tip with Hex Fitting.   The Stainless Steel tip will fit into any Mediflex® Holder and Positioner equipped with a Quick Disconnect Fitting. It is designed to hold stainless steel instruments and retractors that have diameters ranging from 3.5mm to 12.5mm. ...
Detail
1287

Stainless Steel Universal Attachment With Hex Fitting, 5mm -31.75mm

Model No. 69706-L. Stainless Steel Tip with Hex Fitting.   The Stainless Steel tip will fit into any Mediflex® Holder and Positioner equipped with a Quick Disconnect Fitting. It is designed to hold stainless steel instruments and retractors that have diameters ranging from 5.0mm to 31.75mm. ...
Detail
1248

Strong Arm™ Top Mount Single Arm With QC Fitting (No Rail Clamp)

Total reach is 22.5″. Height is adjustable from 3.5″ to 19″. (8.9cm – 48.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 13″ (33cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73001-TM. Top Mount Strong Arm™ Holder and Positioner. This Arm features a Top-Mount which allows 360° rotation in the Horizontal Plane. It also has an extra long vertical post which adds 6 1/4″ (15.6cm) of additional height to the system. By adding the Top Mount and the extra long post, this Arm becomes the “Gold Standard” for holding Nathanson Liver Retractors in Laparoscopic Surgery. Complete with Quick Disconnect Tip. It must be attached to the OR Table with the Mediflex® Heavy Duty Rail Clamp or similar device (available separately.) Single tensioning knob that unlock/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures   ...
Detail
1095

Strong Arm™,Top Mount Single Arm With QC Fitting And Rail Clamp

Total reach is 22.5″. Height is adjustable from 3.5″ to 19″. (8.9cm – 48.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 13″ (33cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73000-TM. Top Mount Strong Arm™ Holder and Positioner. This Arm features a Top-Mount which allows 360° rotation in the Horizontal Plane. It also has an extra long vertical post which adds 6 1/4″ (15.6cm) of additional height to the system. By adding the Top Mount and the extra long post, this Arm becomes the “Gold Standard” for holding Nathanson Liver Retractors in Laparoscopic Surgery. Complete with Quick Disconnect Tip and Heavy Duty, Height Adjustable Rail Clamp. Single Tensioning Knob allows unlock/lock of all three joints simultaneously One piece design Height adjustable Easy learning curve Quick disconnect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001-TM Top Mount StrongArm™ Holder and Positioner (without rail clamp) 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1023

StrongArm™ Combo System With Single FlexArm Plus, QC And Rail Clamp

Total reach is 23″ for the rigid arm and 26″ for the flexible arm. Height is adjustable from 3.5″ to 11.5″. Model No. 99040. StrongArm-Flex Arm™ Combo System. The Combo System features a StrongArm™ Holder and Positioner on one side and a Flex Arm Plus™ Holder and Positioner on the other. It’s ideal for any laparoscopic procedure that requires and instrument and a laparoscope to be held. Both arms feature the Quick Disconnect Tip. And, it comes complete with a Heavy Duty Rail Clamp.
Model Description Size Quantity
99056-QC Companion Flex Arm™ Plus Holding and Positioning Device For 1/2″ (1.27cm) Diameter Posts 1
69099 Heavy Duty O.R Rail Clamp   1
73041 StrongArm Frame for Combo System   1
...
Detail
1228

StrongArm™ Single Arm Front Mount, W/QC Fitting (Clamp Not Included)

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73001. StrongArm™ Holder and Positioner. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Standard Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip. It must be attached to the OR Table with the Mediflex® Heavy Duty Rail Clamp or similar device (available separately.) It can be used with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures. It can also hold Laparoscopic Instruments such as Fan Retractors. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures   ...
Detail
1140

StrongArm™ Single Arm With 10mm Quick Grip And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73000-QG10. StrongArm™ Holder and Positioner with Removable 10mm Scope Holder. A StrongArm Holder and Positioner can also hold a Laparoscope. This Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip, Heavy Duty Rail Clamp and a Delrin Laparoscope Holder. The Scope Holder is designed for 10mm Laparoscopes. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
72162 Quick Grip Scope Holder 10mm 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1063

StrongArm™ Single Arm With 5mm Quick Grip And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73000-QG5. StrongArm™ Holder and Positioner with Removable 5mm Scope Holder. A StrongArm Holder and Positioner can also hold a Laparoscope. This, Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip, Heavy Duty Rail Clamp and a Delrin Laparoscope Holder. The Scope Holder is designed for 5mm Laparoscopes. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
72163 Quick Grip Scope Holder 5mm 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1100

StrongArm™ Single Arm With Bookler Ratchet And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73000-RBA. StrongArm™ Holder and Positioner with Removable Bookler® Ratchet Bar. A StrongArm Holder and Positioner can also hold Bookler Table Mounted Retractor Blades. This, Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip, Heavy Duty Rail Clamp and Bookler Ratchet Bar. The Ratchet Bar will hold all Bookler and Bookwalter Styled Retractor Blades. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model. Description Size Quantity
69708 Bookler® Ratchet Bar Attachment   1
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
69099 Heavy Duty O.R Rail Clamp   1
...
Detail
1144

StrongArm™ Single Arm With Delrin Tip And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73000-DT. StrongArm™ Holder and Positioner with Removable Delrin Tip. A StrongArm Holder and Positioner can also hold a Laparoscope. This Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip, Heavy Duty Rail Clamp and a Delrin Laparoscope Holder. The Delrin Device is adjustable to hold scopes ranging from 1.5mm to 12.5mm in diameter. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
69707 Delrin Tip   1
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
69099 Heavy Duty O.R Rail Clamp   1
...
Detail
1160

StrongArm™ Single With Short Distal Arm And QC Fitting (No Clamp)

Total Reach is 15″ (38.1cm). Height is adjustable from 3.5″ to 11.5″. (8.9cm -29.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 8″ (20.3cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73001-SA. StrongArm™ Holder and Positioner with Short Distal Segment. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Short Distal Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip. It must be attached to the OR Table with the Mediflex® Heavy Duty Rail Clamp or similar device (available separately.) It features a short distal arm segment for use with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures such as Carotid Endarterectomies. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. ...
Detail
1193

StrongArm™, Curved Post System, Short Distal Arm With Quick Disconnect Tip, Heavy Duty Rail Clamp

Model No. 73002. Single StrongArm Series. Simplicity and Rigidity in use. StrongArm™ Curved Post System with short distal arm with quick disconnect tip and heavy duty, height adjustable rail clamp. This arm is “Top-Mounted” with 360° rotation in the horizontal plane. Single tensioning knob that unlock/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures Standard Dimensions: Curved Height Adjustable Post (Vertical Position): 15″ (38.1cm), 3.5-11.5″ (8.9cm – 29.2cm) Range Curved Post (Horizontal Portion): 5″ (12.7cm) Mid Segment: 10.5″ (26.6cm) End Segment: 8″ (20.3cm) Note: tips can add about 3″ (7.6cm) to the end segment length ...
Detail
1178

StrongArm™, Curved Post System, Short Distal Arm With Quick Disconnect Tip, No Rail Clamp

Model No. 73002-NC. Single StrongArm Series. Simplicity and Rigidity in use. StrongArm™ Curved Post System with short distal arm with quick disconnect tip. This arm is “Top-Mounted” with 360° rotation in the horizontal plane. Standard Dimensions: Curved Height Adjustable Post (Vertical Position): 15″ (38.1cm), 3.5-11.5″ (8.9cm – 29.2cm) Range Curved Post (Horizontal Portion): 5″ (12.7cm) Mid Segment: 10.5″ (26.6cm) End Segment: 8″ (20.3cm) Note: tips can add about 3″ (7.6cm) to the end segment length Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick disconnect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures ...
Detail
1297

StrongArm™, Single Arm Front Mount, W/QC Fitting (Clamp Not Included) Long Post

Total reach is 23″. Extended Height is adjustable from 3.5″ to 19″ (8.9cm – 48.2cm). Model No. 73001-LP. StrongArm™ Holder and Positioner. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Standard Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip. It must be attached to the OR Table with the Mediflex® Heavy Duty Rail Clamp or similar device (available separately.) It can be used with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures. It can also hold Laparoscopic Instruments such as Fan Retractors. This arm is “Front Mounted” with 360° rotation in the Vertical Plane.   ...
Detail
1043

StrongArm™, Single Arm With Stainless Steel Tip And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. Model No. 73000-ST. StrongArm™ Holder and Positioner with Removable Stainless Steel Tip. A StrongArm Holder and Positioner can also hold Retractors and other Laparoscopic Instruments. This Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip, Heavy Duty Rail Clamp and a Stainless Steel Instrument Holder. The Stainless Device is adjustable to hold Instruments ranging from 1.5mm to 12.5mm in diameter. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
69706 Stainless Steel Tip   1
69099 Heavy Duty O.R Rail Clamp   1
...
Detail
1175

StrongArm™, Single With Short Distal Arm, QC Fitting And Rail Clamp

Total Reach is 15″ (38.1cm). Height is adjustable from 3.5″ to 11.5″. (8.9cm -29.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 8″ (20.3cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73000-SA. StrongArm™ Holder and Positioner with Short Distal Segment. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Short Distal Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip and Heavy Duty Rail Clamp. It features a short distal arm segment for use with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures such as Carotid Endarterectomies. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single Tensioning knob that unlock/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures This System Contains:
Model Description Size Quantity
73001-SA Short Distal Arm StrongArm™ Holder and Positioner (without rail clamp)   1
69099 Heavy Duty O.R Rail Clamp   1
...
Detail
1218

StrongArm™, Single, Front Mount, QC Fitting And Rail Clamp

Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. (8.9cm -29.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 13″ (33cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73000. StrongArm™ Holder and Positioner. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Standard Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip and Heavy Duty Rail Clamp. It can be used with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures. It can also hold Laparoscopic Instruments such as Fan Retractors. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlock/lock all three joints simultaneously One piece design Height adjustable Easy learning curve Quick disconnect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001 StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 11.5″. 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1207

StrongArm™, Single, Front Mount, QC Fitting And Rail Clamp, Extended Post

Total reach is 23″. Extended Height is adjustable from 3.5″ to 19″. (8.9cm -48.2cm) Range. Mid Segment: 10.5″ (26.6cm) End Segment: 13″ (33cm) Note: Tips can add about 3″ (7.6cm) to the end segment length. Model No. 73000-LP. StrongArm™ Holder and Positioner. A StrongArm Holder and Positioner is the ideal choice when holding an instrument that should not move during the course of the surgical procedure. The Standard Single Arm Strong Arm Holder and Positioner comes complete with a Quick Disconnect Tip and Heavy Duty Rail Clamp. It can be used with the Mini-Bookler® Table Mounted Retractor System in neonatal surgery or in some adult small incision procedures. It can also hold Laparoscopic Instruments such as Fan Retractors. This arm is “Front Mounted” with 360° rotation in the Vertical Plane. Single tensioning knob that unlock/lock all three joints simultaneously One piece design Height adjustable Quick disconnect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73001-LP StrongArm™ Holder and Positioner (without rail clamp) Total reach is 23″. Height is adjustable from 3.5″ to 19″. 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1128

StrongArm™, Twin Arm With QC Fittings And Rail Clamp

Total reach is 23″ for each arm. Height is adjustable from 3.5″ to 11.5″. Model No. 73010. Twin Arm StrongArm™ Holder and Positioner. The Twin Arm Device features two Side Mounted Arms with Quick Disconnect feature on both arms. It is most commonly used in Laparoscopic Surgery to hold a liver retractor with one arm and the laparoscope with the other. It comes complete with a Heavy Duty Rail Clamp. Single tensioning knob that unlock/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures
Model Description Size Quantity
73012 Twin Arm StrongArm™ Holder and Positioner (without rail clamp) 1
69099 Heavy Duty O.R Rail Clamp 1
...
Detail
1202

StrongArm™Frame For Combo System

Model No. 73041. StrongArm Frame for Combo System This is the basic rigid component for the Combo Arm System. It does not include the Flexible Arm nor the Heavy Duty Rail Clamp. StrongArm Features: Single tensioning knob that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures ...
Detail
1319

Twin Arm StrongArm™ Twin Arm With QC Fittings, (Rail Clamp Not Included)

Model No. 73012. Twin Arm StrongArm™ Holder and Positioner. The Twin Arm Device features two Side Mounted Arms with Quick Disconnect feature on both arms. It is most commonly used in Laparoscopic Surgery to hold a liver retractor with one arm and the laparoscope with the other. It must be attached to the OR Table with the Mediflex® Heavy Duty Rail Clamp or similar device (available separately.) Single tensioning knobs that unlocks/locks all three joints simultaneously One piece design Height adjustable Quick connect feature allows for a variety of distal working tips to be used on the same arm For use in both open and laparoscopic procedures ...
Detail
1178

StrongArm Devices Total Products32